blast furnace slag aggregate in concrete

  • Use of Air-Cooled Blast Furnace Slag as Coarse Aggregate

    This report presents available information regarding the use of air-cooled blast furnace slag (ACBFS) as coarse aggregate in concrete pavements. The report discusses ACBFS aggregate production and properties, and the properties of concrete produced with ACBFS coarse aggregate. Both the physical and chemical

  • Use of Blast Furnace Slag Aggregate in Concrete

    Use of Blast Furnace Slag Aggregate in Concrete K.G. Hiraskar and Chetan Patil Abstract-The Iron industries produce a huge quantity of blast furnace slag as by–product, which is a non–biodegradable waste material from that only a small percentage of it is used by cement industries to manufacture cement.

  • Ground granulated blast-furnace slag Wikipedia

    Ground-granulated blast-furnace slag (GGBS or GGBFS) is obtained by quenching molten iron slag (a by-product of iron and steel-making) from a blast furnace in water or steam, to produce a glassy, granular product that is then dried and ground into a fine powder.

  • Use of Air-Cooled Blast Furnace Slag as Coarse Aggregate

    This document contains recommendations for best practices related to the use of air-cooled blast furnace slag (ACBFS) as coarse aggregate in concrete pavements. It is primarily based on the results of a review of available literature regarding the production and use of ACBFS as coarse aggregate in concrete pavements,

  • Tarmac Slag Aggregates Aggregates Asphalt Cement

    Concrete In concrete, processed steel and blast furnace slag provide a sustainable alternative to primary aggregates in the production of lightweight or dense ready-mixed concrete. Blast furnace slag can also be used to make Ground Granulated Blast-furnace Slag (GGBS) which is used as a cement replacement in concrete.

  • Blast Furnace Slag National Slag Association

    Blast furnace slag is allowed to slowly cool by ambient air, is processed through a screening and crushing plant and is processed into many sizes for use primarily as a construction aggregate. Common uses are as aggregates in ready-mix concrete, precast concrete, hot mix asphalt aggregate, septic drain fields and pipe backfill.

  • Significance of Blast Furnace Slag as Coarse Aggregate in

    A comprehensive review of studies has been presented in this paper for scope of replacement of coarse aggregate from blast furnace slag in concrete. Discover the world's research.

  • Ground Granulated Blast Furnace Slag in Concrete and its

    The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at

  • Ground Granulated Blast Furnace Slag (GGBS) Chemical

    May 09, 2018· Ground Granulated Blast Furnace Slag (GGBS) The importance of Ground Granulated Blast Furnace Slag (GGBS) lies in its greener way to become a substitute in concrete material. GGBS being a waste material, it needs proper method for disposal. So incorporating this waste material in concrete can reduce the depletion of conventional concrete components such as cement, fine aggregate

  • Blast Furnace Slag Cement Manufacture, Properties and Uses.

    Blast furnace slag cement is the mixture of ordinary Portland cement and fine granulated blast furnace slag obtained as a by product in the manufacture of steel with percent under 70% to that of cement. Ground granulated blast furnace slag cement (GGBFS) is a fine glassy granules which contain cementatious properties.

  • Blast Furnace Slag National Slag Association

    Blast furnace slag is allowed to slowly cool by ambient air, is processed through a screening and crushing plant and is processed into many sizes for use primarily as a construction aggregate. Common uses are as aggregates in ready-mix concrete, precast concrete, hot mix asphalt aggregate, septic drain fields and pipe backfill.

  • Ground Granulated Blast Furnace Slag (GGBS) Chemical

    May 09, 2018· Ground Granulated Blast Furnace Slag (GGBS) The importance of Ground Granulated Blast Furnace Slag (GGBS) lies in its greener way to become a substitute in concrete material. GGBS being a waste material, it needs proper method for disposal. So incorporating this waste material in concrete can reduce the depletion of conventional concrete components such as cement, fine aggregate

  • Significance of Blast Furnace Slag as Coarse Aggregate in

    A comprehensive review of studies has been presented in this paper for scope of replacement of coarse aggregate from blast furnace slag in concrete. Discover the world's research.

  • Concrete Aggregates Harsco Environmental

    Blast furnace slag can be used as a concrete aggregate, blast furnace is durable and light weight. Steel furnace slags are not recommended for use in concrete unless they are engineered for this application. Consult your local Harsco Environmental site for information on using slag in concrete.

  • 3/8X # 4 Blast Furnace Slag Edw. C. Levy Co.

    ⅜ X #4 Blast Furnace Slag is produced to commercial requirements. Usage Guide: The 3/8 x #4 Blast Furnace Slag should be blended into the hot mix asphalt mixture along with other coarse and fine aggregates, asphalt cement and any other special additives in the proportions detailed in the mix design.

  • Technical Report UDC 669 . 162 . 275 . 2 : 666 . 972 . 12

    Iron Blast Furnace Slag Aggregate for Concrete” in 1977 and fine BF slag aggregate as JIS A 5012 “Water Granulated Iron Blast Fur-nace Slag Aggregate for Concrete” in 1981. Thereafter, the two were unified as JIS A 5011-1 “Slag Aggregate for Concrete, Part 1 Blast Furnace Slag Aggregate”. Then, in 1983, the Japan Society of Civil

  • Effects of Cementitious Slag Content and Aggregate Type on

    The concrete contained a normal total cementitious content of 390kg/m and had different levels of ground granulated blast furnace slag in the range 0, 30, 50 and 70% by weight as replacement material for portland cement. Some of the concretes were prepared using gravel and others with crushed limestone as aggregate.

  • The Exploitation of Blast furnace Slag as Sand Replacement

    Application of steel slag sand results reduced the cement clinker dosage and increasing the content of industrial waste products. Use of non ground granulated blast furnace slag as fine aggregate in concrete was experimented by Isa Yuksel and Omer Ozkan [5].

  • Construction aggregate Wikipedia

    Construction aggregate, or simply "aggregate", is a broad category of coarse to medium grained particulate material used in construction, including sand, gravel, crushed stone, slag, recycled concrete and geosynthetic aggregates.Aggregates are the most mined materials in the world. Aggregates are a component of composite materials such as concrete and asphalt concrete; the aggregate serves as

  • GGBS Ground Granulated Blast Furnace Slag for Concrete!

    Furnace concrete thus ensures higher durability of the structure. GGBS concrete provides the resistance to internal reaction such as an alkali-aggregate reaction. Ground granulated blast furnace slag is not only used in concrete and other applications but is used in in-situ stabilization of soil too.

  • Tarmac Slag Aggregates in Concrete

    Blast furnace slag, peletised slag and granulated slag can be used as an aggregate in concrete replacing primary aggregates in a number of applications. Mortar GGBS used as a cementitous component in mortars enhances workability and can allow further working time for the bricklayer.

  • Study of Granulated Blast Furnace Slag as Fine Aggregates

    Jul 03, 2015· The use of granulated blast furnace slag (GBFS) aggregates in concrete by replacement of natural aggregates is very promising concept because its impact strength is quite more than natural aggregate. Steel slag aggregates are already being used as aggregates in asphalt paving road m due to their mechanical strength, stiffness, porosity, wear

  • USE OF GRANULATED BLAST FURNACE SLAG AS FINE

    USE OF GRANULATED BLAST FURNACE SLAG AS FINE AGGREGATE IN CEMENT MORTAR M C Nataraja1*, P G Dileep Kumar2, A S Manu1 and M C Sanjay1 This paper investigates the possibility of utilizing Granulated Blast Furnace Slag (GBFS) as a sand substitute in cement mortar, in order to reduce environmental problems related to aggregate mining and waste

  • SAFETY DATA SHEET Granulated Blast Furnace Slag

    a raw material for Ground Granulated Blast Furnace Slag (GGBFS), a supplementary cementitious material used in concrete Section 2: Hazards Identification Hazardous Substance. Non-dangerous Goods. The raw material does not expose the user to the same risks as the Ground/Powdered product. See Ground Granulated Blast Furnace Slag for Safety Data.

  • Use of Granulated Blast-Furnace Slag in Concrete as Fine

    Over the past two decades, air-cooled blast furnace slag aggregates have been considered as an alternative coarse aggregate material in concrete toward attaining resource sustainability in the

  • Slag Cement Association > About Slag Cement > IS-01

    Slag cement, or ground granulated blast-furnace slag (GGBFS), has been used in concrete projects in the United States for over a century. Earlier usage of slag cement in Europe and elsewhere demonstrates that long-term performance is enhanced in many ways.

  • Slagment AfriSam

    Slagment is the registered trade name of our Ground Granulated Blast Furnace Slag (GGBFS). It is a latent hydraulic binder that is used in concrete and other construction applications as a partial cement replacement material. We have the capacity to produce over 800 000 tons of slag per year at our Slagment operation in Vanderbijlpark.

  • 21AA Blast Furnace Slag Edw. C. Levy Co.

    21AA Blast Furnace Slag conforms to all the requirements of Michigan Department of Transportation “2012 Standard Specifications for Construction”, section 902 “Aggregates” Usage Guide: The 21AA Blast Furnace Slag should be placed 6″ to 18″ thick depending upon ground conditions and design loadings, in lifts not exceeding 8″.

  • Welcome to Skyway Cement Company

    Blast-furnace slag is produced in a blast furnace during the reduction of iron ore to iron. It consists of non-metallic minerals, which are tapped off from the blast furnace while molten. By processing blast furnace slag into Skyway Cement or slag aggregate, the material is diverted from landfills.

  • Ground Granulated Blast Furnace (GGBF) Slag Used in

    Blast furnace slag is nonreactive in a high alkali environment, such as concrete and soils. Blast furnace slag concrete can be reliably pumped when the slag is supplied to the ready-mix production in a saturated condition. Use of the cementatious properties of ground granulated blast furnace (GGBF) slag was reported as early as 1774. GGBF slag

  • 4 Aggregate Specifications and Requirements

    The fine aggregate, including blended fine aggregate, used in HMA Surface 4.75 mm mixtures is required to have an acid insoluble conten t of not less than 40 percent. For air-cooled blast furnace sl ag or granulated blast furnace slag sand, the acid insoluble content is

  • Strength and Durability of a 70% Ground Granulated Blast

    durability enhancing characteristics when used in concrete. Ground granulated blast furnace slag also has a lower heat of hydration and, hence, generates less heat during concrete production and curing. As a result, GGBFS is a desirable material to utilize in mass concrete placements where control of temperature is an issue.